TIANJIN TISCO

HIGH STANDARD CARBON STEEL PRODUCER

GB-T3091 Ordinary galvanized welded steel pipe

The national standard "Welded Steel pipe for low-pressure fluid transportation" (GB/T 3091-2015), by TC183 (National Steel Standardization Technical Committee) centralized, TC183SC1 (National Steel Standardization Technical Committee Steel pipe Branch) implementation, the competent department for the China Iron and Steel Industry Association.
info@cntiscometal.com
Product Specification
Ingredients/Data

Radius

This standard specifies the size, shape, weight, technical requirements, test methods, acceptance rules, packaging, marking and quality certificates of welded steel pipes for low-pressure fluid transportation.

This standard is applicable to water, air, heating steam, gas and other low pressure fluid transportation welding steel pipe.

This standard includes straight seam high frequency resistance welding (ERW) steel pipe, straight seam submerged arc welding (SAWL) steel pipe and spiral seam submerged arc welding (SAWH) steel pipe, and their different requirements are marked, and not marked at the same time applicable to straight seam high frequency resistance welding steel pipe, straight seam submerged arc welding steel pipe and spiral seam submerged arc welding steel pipe.

Galvanized pipe size specification table


Specification

Galvanized pipe measuring 6 meters

Welded pipe measuring 6 meters

Number

Nominal inside diameter

Inches

OD/mm

WT/mm

Minimum wall thickness

Weight per meter/kg

Weight per stick/kg

Weight per meter/kg

Weight per stick/kg

1

DN15 galvanized pipe

 1/2

21.3

2.8

2.45

1. 35

8.14

1.28

7.68

2

DN20 galvanized pipe

 3/4

26.9

2.8

2.45

1. 76

10. 56

1. 66

9.96

3

DN25 galvanized pipe

1.0 

33.7

3.2

2.8

2.554

15.32

2.41

14.46

4

DN32 beryllium zinc tube

1.25

42.4

3.5

3.06

3.56

21.36

3.36

20.16

5

DN40 galvanized pipe

1.5

48.3

3.5

3.06

4.1

24.6

3.87

23.22

6

DN50 plated front tube

2.0 

60.3

3.8

3.325

5.607

33.64

5.29

31.74

7

DN65 galvanized pipe

2.5 

76.1

4.0 

3.5

7.536

45.21

7.11

42.66

8

DN80 galvanized pipe

3.0 

88.9

4.0 

-

8.88

53.28

8.38

50.28

9

DN100 galvanized pipe

4.0 

114.3

4.0 

-

11.53

69.18

10.88

65.28

10

DN125 galvanized pipe

5.0 

140

4.5

-

15.942

98.65

15.04

90.24

11

DN150 galvanized pipe

6.0 

168.3

4.5

-

19.27

115.62

18.18

109.08

12

DN200 galvanized pipe

8.0 

219.1

6.0(Welded pipe)

-

-

-

31.53

189.18

13

DN200 galvanized pipe

8.0 

219.1

6.5(Hot dip galvanizing)

-

36.12

216.7

-

-


tutu-20.jpg


Product Name

GB-T3091 ordinary galvanized welded steel pipe

Standard

EN/DIN/JIS/ASTM/BS/ASME/AISI etc.

Material type

Q195 Q235A A35 A53 A106 S235 S355 Dx51d+Z Dx52d+Z Dx53d+Z,etc.

Outer Diameter

Seamless: 1/4"-36"

Welding: 21.3mm-3620mm

Round Tube: 1/2"-10"

Square Tube/Rectangular Tube: 15x15mm-400x600mm

Wall Thickness

Seamless: 1.25mm-50mm

Welding: 1.65mm-65mm

Wall Thickness

1MM~12MM as the requirement

Outer Diameter

21.3MM~219.1MM

Length

5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques

Zinc Coating

30g-275g

Technique

Seamless / ERW(GALVANIZED)

Packing

Bundle, or with all kinds of colors PVC or as your requirements

Certificate

CE, tisi, KS, JIS, GS, ISO9001

Delivery Time

within 7 days

Other Services

Machining(cnc), Centerless Grinding(cg), Heat Treatment, Annealing, Pickling, Polishing, Rolling, Forging, Cutting, Bending, Small Machining, etc.


tu107.jpg.png

Current national standard

National standard and size standard for galvanized pipe

GB/T3091-2015 Welded steel pipe for low-pressure fluid transport

GB/T13793-2016 straight welded steel pipe

GB/T21835-2008 Welded steel pipe dimensions and weight per unit length

The difference between hot galvanized pipe and cold galvanized pipe:

Hot-dip galvanized pipe

Hot dip galvanized pipe is the reaction of molten metal with iron matrix to produce alloy layer, so that the matrix and the coating are combined. Hot dip galvanizing is to first pickling the steel pipe, in order to remove the iron oxide on the surface of the steel pipe, after pickling, through ammonium chloride or zinc chloride aqueous solution or ammonium chloride and zinc chloride mixed aqueous solution tank for cleaning, and then into the hot dip plating tank. Hot dip galvanizing has the advantages of uniform coating, strong adhesion and long service life. The matrix of hot dip galvanized steel pipe and the molten bath undergo complex physical and chemical reactions to form a tight zinc-iron alloy layer with corrosion resistance. The alloy layer is integrated with the pure zinc layer and the steel pipe matrix, so its corrosion resistance is strong.

Cold galvanized pipe

Cold galvanized pipe is electric galvanized, galvanized amount is very small, only 10-50g/m2, its own corrosion resistance is much different than hot galvanized pipe. Regular galvanized pipe manufacturers, in order to ensure quality, most do not use electric galvanizing (cold plating). Only those small enterprises with obsolete equipment use electric galvanizing, of course, their prices are relatively cheap. The Ministry of Construction has formally announced the elimination of cold galvanized pipes with backward technology, and it is not allowed to use cold galvanized pipes as water and gas pipes. The galvanized layer of cold galvanized steel pipe is an electric coating, and the zinc layer is independently layered with the steel pipe matrix. The zinc layer is thin, and the zinc layer is simply attached to the steel tube matrix and easy to fall off. Therefore, its corrosion resistance is poor. In new residential buildings, it is prohibited to use cold galvanized steel pipes as water supply pipes.


tutu-21.jpg

Hot product
Our Services
1.jpg
2.jpg
3.jpg

Buy our products, we will provide free service

Business service

Tianjin TISCO is a professional steel supplier. With the support of the most professional steel manufacturers and a large number of customers, we can not only provide you with ordinary steel, but also help you customize special steel, special size, special process shape and other services.

Packaging and transportation

Tianjin TISCO uses standard export transport packaging and bundles steel bands according to the size of the stainless steel plate. We have frequent cooperation with freight forwarders to ensure the safe arrival of goods to the port.
According to our shipping experience, a 20-foot container can hold 22 tons of stainless steel, and a 40-foot container can hold 25 tons of stainless steel. For larger orders, we ship by bulk carrier, which is cheaper. Packaging can also be customized according to customer needs.

Contact us

We provide our customers with planning services, just-in-time production planning and provide customized services to meet the specific requirements of end users. Our company has been committed to improving customer service and product quality for more than ten years, providing high-value solutions for customers' businesses as the basic standard of our work.

SUBMIT